Embedded Touch Screen Monitor
An embedded touch screen monitor combines the embedded form factor with a touch layer, so the front of a piece of equipment becomes both its display and its control surface. This category variant page describes that combination for buyers who search with the touch screen wording. It follows the same evidence rules as the embedded monitor page and does not introduce a separate product line.
Touch in an embedded setting
Touch choice is one of the first decisions in an industrial monitor enquiry, and it should be made from the way the screen will actually be used. A resistive touch layer responds to pressure, so it can be operated with a gloved hand or a stylus, while a capacitive touch layer responds to the touch of a finger and suits a familiar swipe-and-tap style of use. Neither type is better in every setting: the right choice depends on gloves, on whether a stylus will be used, on cleaning routines and on how the screen will be mounted. The model pages on this site state the touch type listed for each model, and where a model lists touch as optional, the enquiry should state which touch type is wanted so the correct version is quoted.
In an embedded setting, the touch layer is part of the equipment's own interface, so its behaviour should be tested with the real application before a larger order. A control screen that needs precise presses suits a different touch choice from a menu screen that needs quick taps, and a screen that will be used with gloves needs a touch type that responds to pressure. The model pages state the touch type listed for each model, and the enquiry should name the wanted touch type and the way the screen will be used.
Front panel design considerations
An embedded touch screen becomes the face of the equipment, so its size, its bezel and its surface finish affect the whole product's appearance. A smaller screen keeps the equipment compact but limits how much information can be shown at once, while a larger screen shows more but needs a larger opening and a stronger fixing. The listed models from 7 inch to 15.6 inch cover that range, and the product pages give the overall dimensions for checking against the front panel design.
Screen size is only the diagonal measurement of the display, and it does not by itself describe a monitor. Two monitors of the same size can differ in resolution, in aspect ratio, in brightness, in touch type and in overall dimensions, because the housing and the mounting form add their own measurements. A buyer comparing sizes should therefore read the full specification for each model, including the overall dimensions and the interface list, rather than ranking models by size alone. The product pages on this site keep each model's figures separate for exactly this reason.
What to confirm before ordering
A useful enquiry names the screen size, the touch type, the interface list, the mounting form and the quantity, and describes the application in one or two sentences. Those five details let the manufacturer check a listed model against the request without a round of clarification questions. A buyer who is unsure about one detail should say so rather than guessing, because a guessed detail can lead to a quotation for the wrong version. Where a value is not listed for a model, the enquiry is the place to ask for it, and the answer should be treated as model-specific rather than as a promise for the whole range.
The enquiry for an embedded touch screen should include the opening dimensions, the fixing method, the touch type, the interface list and the quantity, plus a description of how the screen will be used. A sample fitted into the real front panel is recommended, because a screen that looks right on paper can still feel wrong in use if the touch response or the viewing angle does not suit the application.
Models on this page
7 Inch Touch Monitor C0716
Resistive touch as listed, for a small embedded control screen.
11.6 Inch Touch Monitor C1116
Resistive and capacitive touch as listed, 1920 by 1080 resolution.
Enquiry checklist
Before sending an enquiry, note the screen size, touch type, interface list, quantity and application, and whether the monitor will be open frame, embedded or panel mounted. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Telephone: 0755-89356766, 137 6020 7772
Frequently asked questions
How do I get a quotation?
Send an enquiry with the size, touch type, interface list and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures.
What certification documents can you provide?
CCC, CE, FCC and RoHS are stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure.