Industrial Monitor Buying Guide
Choosing an industrial monitor means matching a screen to a product, a place and a way of working. This guide walks through the decisions in order: size, resolution, touch, interfaces, mounting and enquiry. It uses the listed models on this site as examples, and it does not recommend a single model, because the right model depends on the application. This page uses the buying guide slug deliberately, because the how-to-choose slug is already used by another site in this batch and this site avoids reusing it.
Step one: size and resolution together
Screen size is only the diagonal measurement of the display, and it does not by itself describe a monitor. Two monitors of the same size can differ in resolution, in aspect ratio, in brightness, in touch type and in overall dimensions, because the housing and the mounting form add their own measurements. A buyer comparing sizes should therefore read the full specification for each model, including the overall dimensions and the interface list, rather than ranking models by size alone. The product pages on this site keep each model's figures separate for exactly this reason.
Start with the opening and the viewing distance, then choose a size that fits the opening and shows the content readably at that distance. Then check the resolution for that size: the listed models offer 1024 by 600 at 7 inch, 1024 by 768 at 8 inch and 15 inch, 1280 by 800 and 1920 by 1200 at 10.1 inch, and 1920 by 1080 at 11.6 inch and 15.6 inch. A layout designed for one resolution may not suit another, so the layout should be checked at the real size and resolution rather than assumed to scale. The 15 inch and 15.6 inch models have incomplete specifications, so any value beyond size, resolution, interfaces, touch and, for the 15.6 inch model, mounting should be asked about in the enquiry.
Step two: touch and mounting
Touch choice is one of the first decisions in an industrial monitor enquiry, and it should be made from the way the screen will actually be used. A resistive touch layer responds to pressure, so it can be operated with a gloved hand or a stylus, while a capacitive touch layer responds to the touch of a finger and suits a familiar swipe-and-tap style of use. Neither type is better in every setting: the right choice depends on gloves, on whether a stylus will be used, on cleaning routines and on how the screen will be mounted. The model pages on this site state the touch type listed for each model, and where a model lists touch as optional, the enquiry should state which touch type is wanted so the correct version is quoted.
Mounting form decides how a monitor fits into a finished product, and it should be settled before size or touch type is finalised. An open frame monitor is supplied as a panel for building into a cabinet or a kiosk, so the buyer takes responsibility for the surrounding enclosure and for ventilation. An embedded monitor is designed to sit inside an existing opening, while a panel mount monitor is fixed through a cut-out with its front face visible. Each form changes the measurements that matter: overall size, visible area, fixing positions and depth behind the panel. The enquiry should therefore state the mounting form and the available opening, rather than giving only a screen size.
Touch should follow the hand that will use the screen: gloves or a stylus point to a pressure-responsive layer, while bare hands point to a finger-responsive layer. Mounting should follow the product design: an open frame panel for a custom front, an embedded unit for an existing opening, or a panel mount unit for a cut-out front. Both decisions should be made before a sample is requested, so the sample matches the real product.
Step three: interfaces, brightness and enquiry
Interfaces decide what a monitor can connect to, and they differ between models. The models listed on this site use combinations of HDMI, VGA, USB, AV and BNC, and the exact list for each model is shown on its own page. A buyer should check the interface list against the existing equipment before ordering, because an adapter can solve a connector mismatch but cannot add a signal type that the monitor does not accept. The enquiry should list the source equipment and the cable types already in use, so any mismatch is found before an order is placed rather than after delivery.
Brightness is quoted in candela per square metre, and it only makes sense when the value is tied to a model. A brighter screen is easier to read in a bright room, but brightness alone does not decide readability: the lighting in the room, the angle of the screen and the content on display all play a part. The model pages on this site give the brightness figure listed for each model, and the brightness guide page compares those figures model by model. No single brightness figure is presented as a range-wide value, because the listed figures differ between models.
A useful enquiry names the screen size, the touch type, the interface list, the mounting form and the quantity, and describes the application in one or two sentences. Those five details let the manufacturer check a listed model against the request without a round of clarification questions. A buyer who is unsure about one detail should say so rather than guessing, because a guessed detail can lead to a quotation for the wrong version. Where a value is not listed for a model, the enquiry is the place to ask for it, and the answer should be treated as model-specific rather than as a promise for the whole range.
Interfaces should be checked against the host equipment, brightness should be judged together with the installation light, and the enquiry should name the size, touch type, interface list, mounting form and quantity. Certification should also be named if a document is needed: CCC, CE, FCC and RoHS are stated by the company, and certificates are available upon request. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. A sample tested in the real product is the final check before a larger order.
Models on this page
7 Inch Touch Monitor C0716
The most completely specified small model, for a compact opening.
10.1 Inch Touch Monitor C1016
A medium model with two listed resolutions, for a terminal layout.
15.6 Inch Touch Monitor C1516
The largest listed model, with a listed mounting pattern, for a wall-mounted station.
Enquiry checklist
Before sending an enquiry, note the screen size, touch type, interface list, quantity and application, and whether the monitor will be open frame, embedded or panel mounted. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Telephone: 0755-89356766, 137 6020 7772
Frequently asked questions
How do I get a quotation?
Send an enquiry with the size, touch type, interface list and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures.
What certification documents can you provide?
CCC, CE, FCC and RoHS are stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure.