Touch Monitor for Video Microscopy
Video microscopy shows a magnified image from a microscope camera on a screen, so that several people can view a sample at once or a sample can be recorded. This application page discusses that setting in general terms. It is not a product page, and it does not present any listed model as a microscopy model: the listed models are general touch monitors that can be used for microscopy viewing among other applications. The company's own material lists video microscopy among the applications for its monitors, and this page follows that listing without adding a specification.
What microscopy viewing needs
Microscopy viewing needs a screen that shows fine detail clearly, because the image is the work itself: a sample, a slide or a small component under magnification. Resolution therefore matters more here than in many other applications, and a higher resolution screen shows more detail at the same size. The listed models offer 1920 by 1080 at 11.6 inch and 15.6 inch, which suits detailed viewing, while the smaller models offer lower resolutions that suit a simpler overview. A buyer should check the camera output resolution against the screen resolution, because a screen cannot show detail that the camera does not capture.
Screen size is only the diagonal measurement of the display, and it does not by itself describe a monitor. Two monitors of the same size can differ in resolution, in aspect ratio, in brightness, in touch type and in overall dimensions, because the housing and the mounting form add their own measurements. A buyer comparing sizes should therefore read the full specification for each model, including the overall dimensions and the interface list, rather than ranking models by size alone. The product pages on this site keep each model's figures separate for exactly this reason.
Touch and layout for microscopy work
Touch choice is one of the first decisions in an industrial monitor enquiry, and it should be made from the way the screen will actually be used. A resistive touch layer responds to pressure, so it can be operated with a gloved hand or a stylus, while a capacitive touch layer responds to the touch of a finger and suits a familiar swipe-and-tap style of use. Neither type is better in every setting: the right choice depends on gloves, on whether a stylus will be used, on cleaning routines and on how the screen will be mounted. The model pages on this site state the touch type listed for each model, and where a model lists touch as optional, the enquiry should state which touch type is wanted so the correct version is quoted.
Touch can be useful in microscopy work for switching views, capturing an image or adjusting the display, but the touch type should suit the working conditions, including gloves where they are used. The screen layout should also be planned: a microscopy station often shows the live image alongside controls or measurements, and that layout needs enough screen area to stay readable. A larger screen suits a split layout, while a small screen suits a single live image with minimal controls.
Interfaces for microscopy cameras
Interfaces decide what a monitor can connect to, and they differ between models. The models listed on this site use combinations of HDMI, VGA, USB, AV and BNC, and the exact list for each model is shown on its own page. A buyer should check the interface list against the existing equipment before ordering, because an adapter can solve a connector mismatch but cannot add a signal type that the monitor does not accept. The enquiry should list the source equipment and the cable types already in use, so any mismatch is found before an order is placed rather than after delivery.
Microscopy cameras usually connect through HDMI or USB to a viewing screen or a computer, and the listed models cover HDMI, VGA and USB, with AV and BNC on the two smallest models. A buyer should list the camera outputs in the enquiry, so the connection can be checked before the station is built. This page does not describe microscope cameras, objectives or imaging software, because those are not the company's products.
Models on this page
11.6 Inch Touch Monitor C1116
1920 by 1080 resolution as listed, for detailed microscopy viewing.
15.6 Inch Touch Monitor C1516
1920 by 1080 resolution as listed, for a larger microscopy viewing station.
Enquiry checklist
Before sending an enquiry, note the screen size, touch type, interface list, quantity and application, and whether the monitor will be open frame, embedded or panel mounted. Minimum order quantity and lead time are unavailable on this site and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Telephone: 0755-89356766, 137 6020 7772
Frequently asked questions
How do I get a quotation?
Send an enquiry with the size, touch type, interface list and quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures.
What certification documents can you provide?
CCC, CE, FCC and RoHS are stated by the company. Certificates are available upon request. If a buyer needs a certificate for a specific model, ask for it in the enquiry and name the model, so the correct document can be checked.
Are the specifications on this page valid for every model?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure.